Ultra Tile Pro SS Flex Polymer Modified Standard Set Flexible Tile Adhesive C2TE 20kg White

by Ultra Tile

Single Part, Standard Set, Flexible Tile Adhesive

Ideal For Use With Ceramic & Porcelain, Wall & Floor Tiles

Suitable For Interior & Exterior Use

Bed Thickness: 3 - 16mm

Coverage: 4.5kg/m² at 3mm Bed Thickness

Classification: C2 TE EN 12004

Colour: White

Size: 20kg Bag

Product Code	Price	Quantity
UTF PROSS FLEX WHITE	£12.90 INC VAT £10.75 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Warm Floor Store Ltd can't be held responsible for any under ordering.

Description

UltraTile ProSS Flex is a single-part, standard set, flexible adhesive for wall and floor tiles. It is specially formulated with enhanced adhesion and flexibility for use with ceramic, porcelain and natural stone tiles. UltraTile ProSS Flex is a polymer-modified adhesive suitable for use with most common substrates. It is able to take light foot traffic within 16 hours of installation, depending upon temperature and substrate.

Key Areas Of Use:
General wall installations, General floor installations, Interior installations, Exterior installations, Wet rooms, Domestic showers with tray, Communal showers, Swimming pools, Electric matting underfloor heating, Piped water underfloor heating, Conservatories.

Suitable Tiles:
Ceramic, Porcelain, Mosaics, Marble**, Travertine**, Granite, Limestone**, Terracotta, Quarry, Slate.

Suitable Surfaces & Substrates:
Concrete, Sand/cement screed, Tile backer boards, Cement faced fibre boards, Anhydrite/calcium sulphate/gypsum based screeds, Tile on Tile*, Firm and stable plaster, Plasterboard, Sand/cement render, Concrete brick/block.

*Existing ceramic, porcelain and natural stone tiles (overlay) known as “Tile on Tile”
** Please follow guidelines set out in the product's technical datasheet when using ProSS Flex Grey with Marble, Travertine and Limestone.

Attachments

Ultra Tile ProSS Flex Technical Datasheet.pdf
Ultra Tile ProSS Flex Safety Datasheet-White.pdf

Specification

Unit Size: 20kg Bags.
Colour: White.
Classification: EN12004 Class C2TE.
Bed Thickness: 3mm – 16mm.
Grout After*: 16 hours.
Coverage: 4.5kg/m² at 3mm Bed Thickness.
Pot Life*: 2 Hours at 20°C.
Set Time*: 16 Hours at 20°C.
Application Temperatures: 5°C to 25°C.
Storage & Shelf Life: This product must be stored in unopened bags, clear of the ground in dry conditions. Avoid frost. Ideal storage temperatures are between 5°C and 25°C. Under the above storage conditions, this product has a shelf life of 12 months.

Ultra Tile ProPrimer Advanced Polymer Primer

From

£9.59 INC VAT

£7.99 EX VAT