Ultra Tile ProFlex SP Rapid Set Flexible S1 Adhesive Grey 20kg
by Ultra Tile
Single Part, Rapid Setting, Flexible Adhesive
For Wall And Floor Tiles
Suitable For Internal & External Use
Classification: C2FT S1 EN 12004 & 12002
Coverage: 4.5kg / m² at 3mm Bed Thickness
Bed Thickness: 3mm – 20mm
Colour: Grey
Size: 20kg Bags
| Product Code | Price | Quantity |
|---|---|---|
| UTF PROFLEX SP 20 G |
£15.11 inc VAT
£12.59
ex VAT
|
|
Work out how much you need
Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.
This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Warm Floor Store Ltd can't be held responsible for any under ordering.
Description
UltraTile ProFlex SP is a single-part, rapid-setting, flexible adhesive for wall and floor tiles. It is specially formulated with enhanced adhesion and flexibility, making it ideal for areas where slight movement or vibration can occur. Classified as S1 in accordance with EN12004 it has a high level of deformation for greater tolerance to movement. UltraTile ProFlex SP is a polymer-modified adhesive which provides enhanced performance and high bond strength including installations subject to moisture. It is able to take light foot traffic within 3 hours of installation depending upon temperature and substrate.
Key Features:
• Ideal for use with porcelain, mosaic, natural stone and glass tiles.
• S1 flexibility for timber floors, swimming pools and underfloor heating systems.
• Rapid set properties for fast track installation.
• Conforms to EN12004 Class C2FT S1
Key Areas Of Use:
General wall installations, General floor installations, Interior installations, Exterior installations, Wet rooms, Domestic showers with tray, Communal showers, Swimming pools, Electric matting underfloor heating, Piped water underfloor heating, Conservatories.
Suitable Tiles:
Ceramic, Porcelain, Glass, Mosaics, Marble, Travertine, Granite, Limestone, Terracotta, Quarry, Slate, Quartz, Brick slips.
Suitable Surfaces & Substrates:
Concrete, Sand/cement screed, Tile backer boards, Cement faced fibre boards, Anhydrite/calcium sulphate/gypsum based screeds, Tile on Tile*, Firm and stable plaster, Plasterboard Sand/cement render, Concrete brick/block, Hard vinyl tiles, Flooring grade asphalt.
Specification
Unit Size: 20kg Bags
Colour: Grey
Classification: EN12004 Class C2FT S1
Bed Thickness: 3mm – 20mm
Grout After*: 4 hours
Coverage: 4.5kg / m² at 3mm Bed Thickness
Pot Life*: 60 Minutes at 20°C
Set Time*: 2.5 Hours at 20°C
Application Temperatures: 5°C to 25°C
Storage & Shelf Life: This product must be stored in unopened bags, clear of the ground, in dry conditions. Avoid frost. Ideal storage temperatures are between 5°C and 25°C. Under the above storage conditions, this product has a shelf life of 12 months.
