Ultra Tile ProLevel Fibre Plus Renovation Floor Leveller 20kg
by Ultra Tile
Single-Part Concrete Floor Leveller
High Strength & Rapid Drying
Thickness: 3 - 75mm
Foot Traffic In 4 Hours
Compatible With Underfloor Heating
Classification: CT-C35-F8 AR0.5
Coverage Example: 2.4m² at 5mm Thickness Per 20kg
Bag Size: 20kg
| Product Code | Price | Quantity |
|---|---|---|
| UT PROLEVEL FIBRE PLUS |
£16.79 inc VAT
£13.99
ex VAT
|
|
Work out how much you need
Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.
This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Warm Floor Store Ltd can't be held responsible for any under ordering.
Description
UltraTile ProLevel Fibre Plus is a single-part, high-strength, rapid-drying and curing concrete floor leveller. The product's formulation incorporates a blend of specially graded fillers, cements, polymers and fibres. It is mixed with clean cold water to give a free-flowing product that can be applied from 3 - 75mm in one application. Our specifically formulated fibre technology aids application and strength, resulting in a strong, sound and even base ready to commence the tiling process after only 4 hours. Its fast set time (in good ambient conditions) enables light foot traffic in 3 hours. Can be used in very heavy traffic areas, including heavy wheeled traffic, and has an AR 0.5 abrasion resistance category.
Suitable Surfaces & Substrates:
• Concrete subfloors.
• Tamped or pan floated concrete.
• Sand/cement screeds.
• Existing smoothing underlayments.
• Terrazzo/granolithic ceramic tiles.
• Anhydrite/calcium sulphate/gypsum based screeds.
• Plywood/tile backer board.
• Warm water underfloor heating.
• Radiant electrical underfloor heating system.
• UltraFloor DPM IT.
Specification
Classification: CT-C35-F8 AR0.5.
Depth: 3- 75 mm.
Working time at 20°C: *20-30 Minutes.
Walk-on hardness time at 20°C: *3 Hours (3mm application).
Commence tiling: *4 Hours.
Compressive Strength (N/mm²): 28 Days: 35.0 (to BS EN 13892-2).
Flexural Strength (N/mm²): 28 Day: 8 (to BS EN 13892-2).
Coverage:
• Thickness: 3mm = 4.0m² Per 20kg Bag.
• Thickness: 5mm = 2.4m² Per 20kg Bag.
• Thickness: 10mm = 1.2m² Per 20kg Bag.
• Thickness: 15mm = 0.8m² Per 20kg Bag.
Storage & Shelf Life: This product must be stored in unopened bags, clear of the ground in dry conditions. Avoid frost. Ideal storage temperatures are between 5°C and 25°C. Under the above storage conditions, this product has a shelf life of 8 months. High temperatures and high humidity will lead to a reduced shelf life.
